Product Name

UVA-340 UV aging test chamber Lamp

model

UVA-340 imported with original packaging

Place of Origin

U.S.A

power

40W per unit

wavelength

320～400nm

Lamp length

1200㎜

life

About 1600-1800 hours

Installation method of UVA-340 lamp tube:

Installation of lamp tubes: UV lamps are fragile items, so they are packaged separately when leaving the factory. Special care should be taken during installation to avoid unnecessary losses. During installation, after the instrument is powered off, open the test chamber cover and ｒｅｐｌａｃｅ the ports on both sides of the lamp tube. ｉｎｓｅｒｔ the UV fluorescent lamp alignment sealing ring, then push the lamp tube to align the other side sealing ring, adjust the sealing caps on both ends of the lamp tube, and install the lamp tube power supply connector. Pay attention to the cleanliness of the surface of the lamp used to prevent affecting the irradiance of the lamp. If there is contamination, wipe the surface with alcohol. Backup light tubes should be stored in a ventilated, dry, and non corrosive environment